Main Highlights

Main Highlights

Main Highlights

• 
  Thread: 1/4 NPT
• 
  Rated Flow: 19.4 SCFM(550 L/min)
• 
  Temperature Range: 5~60(41-140)
• 
  Aluminum Alloy Material
• 
  When regulating pressure, pull up the rotary knob and rotate clockwise to increase the pressure and rotate anticlockwise to decrease the pressure

Main Highlights

• 
  CGA 870 OXYGEN REGULATOR - A compact and light weight oxygen regulator is designed to fit any oxygen tank with a CGA 870 style fitting. Made of lightweight anodized aluminum with brass high pressure conduits. Designed to be used on oxygen tanks up to 2000 PSI.
• 
  ADJUSTABLE FLOW RATE - Easily adjusts between 12 preset flow settings from 0-15 LPM with a simple turn of the knob. Easy to read indicator shows the current LPM.
• 
  COMPACT SIZE - The regulator measures approximately 4.5" x 2.5" x 1.25", so it won't make oxygen tanks overly cumbersome by taking up too much space.
• 
  SINGLE BARB OUTLET - The barb design fits securely into tubing and prevents leaks and detachment.
• 
  OXYGEN KEY INCLUDED - Includes durable oxygen key (or wrench) that allows you to open portable oxygen cylinders. Comes with a chain that can be attached to the regulator for easy access.

Main Highlights

• 
  PROPANE BRASS ORIFICE FITTING SIZES - 3/8 flare M x 1/8 MNPT
• 
  A USER FRIENDLY, TOP QUALITY CONNECTION - This High-Pressure Regulator and Hose is adjustable from 0-20 PSI with its red knob and has a top notch output for a wide variety of Propane Appliances from Burners and Heaters to Smokers and Fryers.
• 
  LONG LASTING AND DURABLE - Gas Ones 2109-RED High-Pressure Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2109-RED ensures a stable connection and a leak-free experience with your heavy-duty appliance
• 
  READY FOR USE- The High-Pressure Hose and Regulator is ready to use right out of the box. Simply connect the regulator to the tank and appliance when ready to use (tightening with tools suggested for a secure connection)
• 
  MEASUREMENTS- The 2109-RED measures at 4 ft long and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside -inch flare fitting and has an outside diameter of inches

Main Highlights

• 
  Fits any tank with 870 CGA fitting
• 
  Adjustable flow rate of 0-15 liters per minute
• 
  Compact size measures only 4.5" x 2.5" x 1.25"
• 
  Includes heavy-duty plastic cylinder wrench
• 
  Single barb outlet, 50psi, P/N - LXO2R-M

Main Highlights

• 
  Body Sizes and End Connection Styles (inlet x outlet): 1/4 inch x 1/2 inch FNPT
• 
  Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
• 
  Outlet Pressure Ranges : 10.2 13 inches w.c. / 25 32 mbar
• 
  Capacity : 550,000 BTU/hr
• 
  Vent Size : 1st Stage : 7/16-24 Inverted Flare | 2nd Stage : 3/8 NPT screened

Main Highlights

Main Highlights

• 
  Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC purging / Inertization / pressure tests / leakage tests / Brazing / Soldering
• 
  Accurate Pressure Gauge: Nitrogen regulator hvac, there are two easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure.
• 
  Connections: Helium regulator, CGA-580 Inlet connector, fits all nitrogen, argon, helium, and inert gas tanks, 1/4" SAE male flare outlet connection - 7/16-20 threads for easy installation
• 
  Structure: Nitrogen regulator 0-600PSI CGA580 Inlet, solid brass, durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system), large brass tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling
• 
  Providing High Quality and Professional Parts with Great Service: If you have any questions, please feel free to contact us by email for more information! we will solve it for you in the first time

Main Highlights

• 
  This Kegco 542 Pro Series Commercial Grade Dual Gauge Regulator works with any Co2 tank with a CGA-320 valve
• 
  Measures PSI as well as the volume of the Co2 gas in the cylinder
• 
  Regulator body is constructed of forged brass with all brass connections and components
• 
  Integral safety pressure relief valve releases at 45 PSI
• 
  Large hand control makes it easy to adjust the pressure inside keg