You are here: Home > Bike Models > Motorized Bicycle Frame
Browse our selection of Motorized Bikes, we make sure your next
motorized bicycle is as simple to build as possible.
Sort By:
Page of 1
Motorized Bicycle Frame Black Motorized Bicycle Frame Black
Aluminum 26" Motor-Ready Bicycle w/ 2.4L In-Frame Gas Tank (White)
List Price: $799.95
Our Price: $499.95
Sale Price: $499.95
Save $300.00!
Aluminum 26" Motor-Ready Bicycle w/ 2.4L In-Frame Gas Tank (Black)
List Price: $799.95
Our Price: $499.95
Sale Price: $499.95
Save $300.00!
Aluminum 26" Motor-Ready Bicycle w/ 2.4L In-Frame Gas Tank (Red)
List Price: $799.95
Our Price: $499.95
Sale Price: $499.95
Save $300.00!

26" Motor-Ready Bicycle is everything motorized bike riders dream of and more. If you’ve got an engine you’ve been dying to mount but no bike to fit it to, let us take the guess work out of mounting a motor.

Suspension and safety are key for us, and this bike doesn’t disappoint. No need to buy a whole new brake set for your bike, because this bike comes with a rear caliper brake and a front disc brake assembly already installed- all you have to do is set the cables in to the brake levers. The front suspension forks will help on those rides or races that go through tough paths, letting you ride as hard as you want without worrying your forks will be damaged. With the wide handlebars, there’s plenty of grip and handling for wide and sharp turns on your ride.

Aside from its extra wide and extra comfy saddle, this bike’s rocking strong 26” Mag Wheels supported by 26x1.95” Kenda tires for full support while riding. But don’t think this bike’s not made for speed: these wheels cut down on wind resistance better than regular bike wheels can.

Not only does this frame eliminate the need for a clunky gas tank, but nearly any 2 stroke engine kit will work. Whether you have a Flying Horse, Grubee, PK-80, or any other engine, this bike’s got the spacing and the prefect tube sizes for mounting an engine with no hassles or modifications.

There’s nothing worse than getting a bike motor and a bike, all to have them not fit with each other. With the Aluminum 26" Motor-Ready Bicycle you won’t have to worry about that again. Just grab your 2-stroke motor, fit in right in the frame, connect your cables, fuel up, and you’re ready to roll!

Bike Specifications:
Frame: Aluminum 26 Inch Motorized Bicycle Frame w/ 2.4L Gas Tank (White)
Forks: Suspension Forks
Headset: 33mm Aluminum
Handlebars: Flat Riser Bars, 27.25” (L); 22mm Grip
Brakes: Front Disc Brake; Real Caliper Brake w/ Brake Cables
Wheels: 26 Inch Mag wheels with a dual drive rear wheel
Tires: Kenda 26x1.95” Tires
Rear Sprockets: 22t Single Speed Freewheel Sprocket (bicycle drive train) & 36t Drive Sprocket (bike engine drive train)
Crank: One Piece Crank w/ 44t Chain Ring
Center Kick Stand Include

26" Motor-Ready Bicycle is everything motorized bike riders dream of and more. If you’ve got an engine you’ve been dying to mount but no bike to fit it to, let us take the guess work out of mounting a motor.

Suspension and safety are key for us, and this bike doesn’t disappoint. No need to buy a whole new brake set for your bike, because this bike comes with a rear caliper brake and a front disc brake assembly already installed- all you have to do is set the cables in to the brake levers. The front suspension forks will help on those rides or races that go through tough paths, letting you ride as hard as you want without worrying your forks will be damaged. With the wide handlebars, there’s plenty of grip and handling for wide and sharp turns on your ride.

Aside from its extra wide and extra comfy saddle, this bike’s rocking strong 26” Mag Wheels supported by 26x1.95” Kenda tires for full support while riding. But don’t think this bike’s not made for speed: these wheels cut down on wind resistance better than regular bike wheels can.

Not only does this frame eliminate the need for a clunky gas tank, but nearly any 2 stroke engine kit will work. Whether you have a Flying Horse, Grubee, PK-80, or any other engine, this bike’s got the spacing and the prefect tube sizes for mounting an engine with no hassles or modifications.

There’s nothing worse than getting a bike motor and a bike, all to have them not fit with each other. With the Aluminum 26" Motor-Ready Bicycle you won’t have to worry about that again. Just grab your 2-stroke motor, fit in right in the frame, connect your cables, fuel up, and you’re ready to roll!

Bike Specifications:
Frame: Aluminum 26 Inch Motorized Bicycle Frame w/ 2.4L Gas Tank (Black)
Forks: Suspension Forks
Headset: 33mm Aluminum
Handlebars: Flat Riser Bars, 27.25” (L); 22mm Grip
Brakes: Front Disc Brake; Real Caliper Brake w/ Brake Cables
Wheels: 26 Inch Mag wheels with a dual drive rear wheel
Tires: Kenda 26x1.95” Tires
Rear Sprockets: 22t Single Speed Freewheel Sprocket (bicycle drive train) & 36t Drive Sprocket (bike engine drive train)
Crank: One Piece Crank w/ 44t Chain Ring
Center Kick Stand Include

26" Motor-Ready Bicycle is everything motorized bike riders dream of and more. If you’ve got an engine you’ve been dying to mount but no bike to fit it to, let us take the guess work out of mounting a motor.

Suspension and safety are key for us, and this bike doesn’t disappoint. No need to buy a whole new brake set for your bike, because this bike comes with a rear caliper brake and a front disc brake assembly already installed- all you have to do is set the cables in to the brake levers. The front suspension forks will help on those rides or races that go through tough paths, letting you ride as hard as you want without worrying your forks will be damaged. With the wide handlebars, there’s plenty of grip and handling for wide and sharp turns on your ride.

Aside from its extra wide and extra comfy saddle, this bike’s rocking strong 26” Mag Wheels supported by 26x1.95” Kenda tires for full support while riding. But don’t think this bike’s not made for speed: these wheels cut down on wind resistance better than regular bike wheels can.

Not only does this frame eliminate the need for a clunky gas tank, but nearly any 2 stroke engine kit will work. Whether you have a Flying Horse, Grubee, PK-80, or any other engine, this bike’s got the spacing and the prefect tube sizes for mounting an engine with no hassles or modifications.

There’s nothing worse than getting a bike motor and a bike, all to have them not fit with each other. With the Aluminum 26" Motor-Ready Bicycle you won’t have to worry about that again. Just grab your 2-stroke motor, fit in right in the frame, connect your cables, fuel up, and you’re ready to roll!

Bike Specifications:
Frame: Aluminum 26 Inch Motorized Bicycle Frame w/ 2.4L Gas Tank (Red)
Forks: Suspension Forks
Headset: 33mm Aluminum
Handlebars: Flat Riser Bars, 27.25” (L); 22mm Grip
Brakes: Front Disc Brake; Real Caliper Brake w/ Brake Cables
Wheels: 26 Inch Mag wheels with a dual drive rear wheel
Tires: Kenda 26x1.95” Tires
Rear Sprockets: 22t Single Speed Freewheel Sprocket (bicycle drive train) & 36t Drive Sprocket (bike engine drive train)
Crank: One Piece Crank w/ 44t Chain Ring
Center Kick Stand Include

Motorized Bicycle Frame Black
Aluminum 26" Motor-Ready Bicycle w/ 2.4L In-Frame Gas Tank (Blue)
List Price: $799.95
Our Price: $499.95
Sale Price: $499.95
Save $300.00!

26" Motor-Ready Bicycle is everything motorized bike riders dream of and more. If you’ve got an engine you’ve been dying to mount but no bike to fit it to, let us take the guess work out of mounting a motor.

Suspension and safety are key for us, and this bike doesn’t disappoint. No need to buy a whole new brake set for your bike, because this bike comes with a rear caliper brake and a front disc brake assembly already installed- all you have to do is set the cables in to the brake levers. The front suspension forks will help on those rides or races that go through tough paths, letting you ride as hard as you want without worrying your forks will be damaged. With the wide handlebars, there’s plenty of grip and handling for wide and sharp turns on your ride.

Aside from its extra wide and extra comfy saddle, this bike’s rocking strong 26” Mag Wheels supported by 26x1.95” Kenda tires for full support while riding. But don’t think this bike’s not made for speed: these wheels cut down on wind resistance better than regular bike wheels can.

Not only does this frame eliminate the need for a clunky gas tank, but nearly any 2 stroke engine kit will work. Whether you have a Flying Horse, Grubee, PK-80, or any other engine, this bike’s got the spacing and the prefect tube sizes for mounting an engine with no hassles or modifications.

There’s nothing worse than getting a bike motor and a bike, all to have them not fit with each other. With the Aluminum 26" Motor-Ready Bicycle you won’t have to worry about that again. Just grab your 2-stroke motor, fit in right in the frame, connect your cables, fuel up, and you’re ready to roll!

Bike Specifications:
Frame: Aluminum 26 Inch Motorized Bicycle Frame w/ 2.4L Gas Tank (Blue)
Forks: Suspension Forks
Headset: 33mm Aluminum
Handlebars: Flat Riser Bars, 27.25” (L); 22mm Grip
Brakes: Front Disc Brake; Real Caliper Brake w/ Brake Cables
Wheels: 26 Inch Mag wheels with a dual drive rear wheel
Tires: Kenda 26x1.95” Tires
Rear Sprockets: 22t Single Speed Freewheel Sprocket (bicycle drive train) & 36t Drive Sprocket (bike engine drive train)
Crank: One Piece Crank w/ 44t Chain Ring
Center Kick Stand Include

   
 
Make your bicycle build a very easy experience.